Alcatel OmniAccess AP70 Guide d'installation télécharger pdf (Page 42)

OmniAccess OAW-AP70: Installation Guide

38 Part 031644-00 May 2005

AP Support

Access Levels

z User Access

User access is a low security level, featuring only the most basic commands. It

is available without any additional login after the AP has booted.

z Privileged Access

Privileged-level access requires the privileged password (the same privileged

password used on the switch) to be entered using the user level enable

command. The privileged access level is available only after the AP has

successfully booted and synchronized with Wireless LAN switch.

User Commands

z ping <host|IP address>

Verify IP connectivity between the AP and the host address.

z route

Display the contents of the AP route table.

z ifconfig

Display the AP’s IP address settings.

z enable <privileged password>

Access the AP Support privileged mode.

Privileged Commands

In addition to the user commands, the following commands are available upon

successfully entering the privileged mode:

z ps

z show [config|stats|version]

NOTE—These commands should be used only as directed by Alcatel Customer Sup-

port.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 59 60

Pas de commentaire

Alcatel OmniAccess AP70 Guide d'installation Page 42