Alcatel 9000 Guide de l'utilisateur télécharger pdf (Page 215)

100

101

Configuring 802.1Q Configuring an 802.1Q VLAN

OmniSwitch 6800/6850/9000 Network Configuration Guide June 2006 page 11-5

Configuring an 802.1Q VLAN

The following sections detail procedures for creating 802.1Q VLANs and assigning ports to 802.1Q

VLANs.

Enabling Tagging on a Port

To set a port to be a tagged port, you must specify a VLAN identification (VID) number and a port

number. You may also optionally assign a text identification.

For example, to configure port 4 on slot 3 to be a tagged port, enter the following command at the CLI

prompt:

-> vlan 5 802.1q 3/4

Tagging would now be enabled on port 3/4, with a VID of 5.

To add tagging to a port and label it with a text name, you would enter the text identification following the

slot and port number. For example, to enable tagging on port 4 of slot 3 with a text name of port tag, enter

the command in the following manner:

-> vlan 5 802.1q 3/4 “port tag”

The tagged port would now also be labeled port tag. Note that you must use quotes around the text

description.

The VLAN used to handle traffic on the tagged port must be created prior to using the vlan 802.1q

command. Creating a VLAN is described in Chapter 5, “Configuring VLANs.”

For more specific information, see the vlan 802.1q command section in the OmniSwitch CLI Reference

Guide.

Enabling Tagging with Link Aggregation

To enable tagging on link aggregation groups, enter the link aggregation group identification number in

place of the slot and port number, as shown:

-> vlan 5 802.1q 8

(For further information on creating link aggregation groups, see Chapter 13, “Configuring Static Link

Aggregation,” or Chapter 14, “Configuring Dynamic Link Aggregation.”)

To add tagging to a port or link aggregation group and label it with a text name enter the text identifica-

tion following the slot and port number or link aggregation group identification number. For example, to

enable tagging on link aggregation group 8 with a text name of agg port tag, enter the command in the

following manner:

-> vlan 5 802.1q 8 “agg port tag”

The tagged port would now also be labeled agg port tag. Note that you must use quotes around the text

description.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 701 702

Commentaires sur ces manuels

Pas de commentaire

Alcatel 9000 Guide de l'utilisateur Page 215

Commentaires sur ces manuels

Produits connexes et manuels pour Logiciel Alcatel 9000