Alcatel One Touch 890D Spécifications télécharger pdf (Page 9)

15 16

Installing or removing the battery

Insert and click the battery into place, then close the phone cover.•

Unclip the cover, then remove the battery.•

Installing and removing the memory card (MicroSD card)

To release the microSD card holder, slide it in the direction of the

arrow and lift it. Then insert the microSD card with the golden contact

downward. Finally, turn down the microSD holder and slide it in the

opposite direction to lock it.

Charging the battery

Connect the battery charger.

The • End key's backlight will be lit up when charging a completely flat

battery. After a while the light will go out and the phone can then be

switched on.

Be careful not to force the plug into the socket.•

Make sure the battery is correctly inserted before connecting the •

charger.

The mains socket must be near to the phone and easily accessible (avoid •

electric extension cables).

When using your telephone for the first time, charge the battery fully •

(approximately 4 hours).

You are advised to fully charge the battery (

). Charging status is

indicated by the depth of water on the lock screen. The depth increases

as the phone is charged.

To reduce power consumption and energy waste, when battery

is fully charged, disconnect your charger from the plug; switch off

Wi-Fi, GPS, Bluetooth or background-running applications when

not in use; reduce the backlight time, etc.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 72 73

Pas de commentaire

Alcatel One Touch 890D Spécifications Page 9